Granite Aux Portabidón de Carbono con Kit de Correa
Granite Aux Portabidón de Carbono con Kit de Correa
Straps on where there's no bottle mount.
A side-loading carbon cage that straps to any frame or fork with silicone-coated straps — no bottle bosses needed. 45 g. Cage alone, with the strap kit, or the E+ kit for e-bike tubes.
Description
¿Te cuesta colocar un bidón en tu bicicleta?
El portabidón Aux de Granite y la correa ofrecen un portabidón robusto de carga lateral que se fija a cualquier cuadro u horquilla, ideal para bicicletas sin anclajes estándar. Así te aseguras una hidratación fácil y estabilidad incluso en terrenos accidentados.
El kit incluye todo lo necesario para el montaje, con correas recubiertas de silicona y almohadillas de goma antideslizantes para un ajuste seguro.
Para ciclistas de e-bike, la Granite Aux E+ ofrece un ajuste adaptado para cuadros más grandes (70 mm a 130 mm), garantizando un transporte de agua fácil y con estabilidad fiable.
Straps to frame or fork
No bottle bosses required. Two silicone-coated straps wrap the tube and hold the cage tight.
Grab it from the side
The side-loading opening lets you pull and replace the bottle in tight frames.
Feature
Bikes without mounts
Full-suspension MTB, small frames and forks — anywhere there are no bottle bosses.
Fits 27.2 to 70 mm tubes
The strap kit wraps round and aero tubes across most frames.
E-bikes and fat tubes
Choose the Aux E+ kit for oversized 70 to 130 mm e-bike downtubes.
Specs
- TypeSide-load carbon bottle cage
- MountingStraps to any frame or fork, or bolts to bottle bosses
- Cage materialCarbon fiber-reinforced thermoplastic
- Weight45 g (cage)
- Dimensions145 mm tall, 78.5 / 81.5 mm wide
- Straps2 silicone-coated hook-and-loop
- Strap fit27.2 to 70 mm tubes (E+ kit: 70 to 130 mm)
- Grippy padSilicone rubber, between cage and frame
- Bottle entrySide, right-hand
- ColourBlack
Instruction
Thread the straps
Pass the two straps through the slots in the cage, silicone side facing the frame. Clean the tube and set the grippy pad between the cage and the frame.
Wrap and buckle
Loop each strap around the tube and back through the buckle. Position the cage where you want it.
Fasten and check
Pull the straps tight, press the hook-and-loop down, and check the cage doesn't move. Trim any excess strap.