Granite Portaledge Strap Mount
Granite Portaledge Strap Mount
A strap mount on your bottle bosses.
Bolt the alloy plate to a spare set of bottle bosses, then strap a tube, CO2 and tire levers to your frame. No pack, no saddle bag.
Description
The Granite Portaledge is a strap mount for your bottle bosses. Bolt the 6061 alloy plate to a standard set of bosses you're not using, thread the strap through it, and carry a spare tube, a CO2 inflator and tire levers on the frame instead of in a pack.
The 30 mm hook-and-loop strap has a silicone-coated face that grips your kit, and it cinches through a buckle next to the plate, so the load stays put on rough trails. Two M5 bolts are in the box; all you need is a hex key.
The plate is 83 × 52 mm and the whole mount weighs 40 g, in black or orange. Want a bottle on the same bosses? The Portaledge XE combines a bottle cage mount with the strap.
Feature
Uses your bottle bosses
The 83 x 52 mm alloy plate bolts to a standard set of bosses you're not using, with the two M5 bolts in the box.
Tube, CO2 and levers
One strap holds a spare tube, a CO2 inflator and a pair of tire levers against the frame.
Cinched tight
The strap's silicone-coated face grips the kit, and the buckle next to the plate lets you pull it down hard.
Fit it in three steps
Bolt on the plate
Fix the plate to your bottle bosses with the two M5 bolts and a hex key.
Thread the strap
Pass the hook-and-loop strap through the openings in the plate, silicone-coated side facing out.
Wrap and cinch
Wrap the strap around your kit, pass it through the buckle near the plate and pull it tight before you close it.
Specs
- Mounts toStandard bottle bosses
- Plate6061 alloy, 83 x 52 mm
- Strap30 mm hook-and-loop, silicone-coated, with buckle
- CarriesA spare tube, CO2 cartridge and inflator, tire levers
- Weight40 g
- HardwareTwo M5 bolts included
- Tools neededHex key
- ColorsBlack, Orange