Granite Stash Tool Kit Airtag Mount
Granite Stash Tool Kit Airtag Mount
Track your bike from inside the fork.
Convert your Stash or Stash RT lower cap into a hidden home for an Apple AirTag, tucked under the fork crown. CNC alloy cap, RF-transparent cover. AirTag not included.
Description
The Stash AirTag Mount turns the Stash tool kit you already run into a hidden bike tracker. It replaces the 42 mm lower cap on a Stash or Stash RT with a CNC-machined alloy cap that holds an Apple AirTag under the fork crown, deep in the steerer where a thief has no reason to look.
The tag sits under a composite cover instead of an alloy one, so its signal reaches the Find My network. Drop the AirTag in with the silver side facing out, thread the cover on, and refit the tool. A 5 mm and a 6 mm hex key are all you need.
It works only with a Stash or Stash RT kit that uses a 42 mm lower cap on a tapered steerer, and it is not for the Stash RCX. No Stash yet? Add a Stash RT tool kit and carry your tools and your tracker in the same steerer. AirTag not included.
Hidden under the fork crown
The mount rides low in the steerer, under the crown. It looks like a stock fork cap.
Replaces your kit's lower cap
Swap it in for the 42 mm lower cap on your Stash or Stash RT. The tool still stashes above it.
Feature
Fits the Stash RT
Drops in for the Stash RT lower cap. Run the ratchet kit and this is your mount. Stash RT tool kit.
Fits the original Stash
Also fits the original 42 mm tapered-steerer Stash kit. New to Stash? Start with the Stash RT.
42 mm tapered steerers
For 42 mm lower caps on tapered steerers. Not compatible with the Stash RCX or 30 mm straight steerers.
Specs
- TypeHidden AirTag mount for the Stash tool kit
- FitsStash and Stash RT, 42 mm lower cap
- SteererTapered
- Not compatibleStash RCX, 30 mm straight steerers
- Lower capCNC-machined alloy
- CoverComposite, RF-transparent
- AirTagNot included; one Apple AirTag, silver side out
- ColourBlack
- Tools to fit5 mm and 6 mm hex
- In the box1 conversion lower cap, 1 cover
Instruction
Swap the lower cap
Take the tool kit out of the steerer, remove the standard 42 mm lower cap, and move its O-ring and center nut onto the conversion cap.
Drop the AirTag in
Place the AirTag in the cap with the silver side facing out, then thread the composite cover on over it.
Cover it and refit
Fit the mount back under the crown, set the headset preload and stem bolts, and slide the tool back in above it.