Granite Pita Bicycle Pedal Covers
Granite Pita Bicycle Pedal Covers
Cover the pins. Save the paint.
Slide Pita over the pedal, press the flap down, and the pins stop chewing your car, the bike next to it and whatever else your bike leans on. 3mm neoprene, on in seconds.
Description
Pedal pins are great on the trail and a menace everywhere else. Pita is a 3mm neoprene sleeve that slides over the pedal and closes with a hook-and-loop flap, so the pins stop scratching the car interior, the bike beside it on the rack, and anything else your bike leans on.
Two sizes cover almost any pedal. Large takes flats up to 115 × 115 mm; Small takes smaller platforms and road clipless pedals up to 100 × 85 mm. On in seconds, off in seconds, and the hang loop keeps the pair on a hook when they are not on the bike.
Sold as a pair, in black or camo green.
Two sizes. Measure the pedal.
- LargePedals up to 115 × 115 mm (4.53 in). Cover measures 135 × 125 mm. Most flat pedals.
- SmallPedals up to 100 × 85 mm (3.94 × 3.35 in). Cover measures 105 × 115 mm. Small platforms and road clipless.
- Not sure?Measure the pedal body without the axle. If it is close, take the Large.
On in one motion
Slide it over the pedal and press the hook-and-loop flap down. It stays put in the back of the car and comes off just as fast at the trailhead.
Hang loop
A loop on each cover hangs the pair on a hook in the van or clips to a strap, so they are where you left them next time.
Feature
Black
Black neoprene, orange stitching.
Camo Green
Digital camo print on the same 3mm neoprene.
Sold as a pair
One cover for each pedal, both sizes, both colours.
Specs
- Material3mm neoprene
- ClosureHook-and-loop flap
- LargeFits pedals up to 115 × 115 mm · cover 135 × 125 mm
- SmallFits pedals up to 100 × 85 mm · cover 105 × 115 mm
- ColoursBlack · Camo Green
- QuantitySold as a pair
- ExtrasHang loop on each cover