Granite Suture Tire Plug Kit
Granite Suture Tire Plug Kit
Plug the flat. Keep riding.
A tubeless repair kit in one alloy canister: the plug fork lives in the end cap and ten plugs ride inside.
Description
The Granite Suture is a tubeless repair kit for bike tires built into one CNC-machined alloy canister. The insertion fork is part of the end cap: unscrew it, turn it around and screw it back on, and the canister becomes the handle you push the plug in with.
Ten plugs come in the box: five 1.5 mm for small holes and five 3.5 mm for bigger ones. Cut a few off the sheet and store them inside the canister so they ride with the tool. The reamer section on the fork cleans up the hole before the plug goes in, and the hole in the end of the canister unscrews a Presta valve core when you want to top up sealant. When you run low, the Stash Tire Plug Refill Pack adds ten more in either size.
In black or orange. Want to reinflate with the same tool? The Suture Aero adds a CO2 inflator to the handle.
Feature
Fork in the end cap
The insertion fork is built into the end cap, so there's no loose tool to lose.
Two plug sizes
Five 1.5 mm plugs for small holes and five 3.5 mm plugs for bigger cuts.
Presta core remover
The hole in the end of the canister unscrews a Presta valve core for a sealant top-up.
Plug a tubeless tire in three steps
Turn the fork around
Unscrew the fork-side end cap, turn it 180 degrees and screw it back on, so the canister becomes your handle.
Find the hole
Locate the puncture and clear any debris. Use the reamer section on the fork to clean up the hole if needed.
Plug it
Load a plug on the fork, push it halfway in and pull the fork out, leaving the plug in the tire. Reinflate and check for leaks.
Specs
- Plugs10: five 1.5 mm, five 3.5 mm
- AlsoReamer on the fork, Presta valve core remover
- MaterialCNC-machined alloy
- ColorsBlack, Orange
- ForTubeless tires only