Sonnette de vélo Granite Cricket
Sonnette de vélo Granite Cricket
One bell. Two sounds.
A single strike for a quick alert, or pull the dome down for a continuous cowbell on the trail. Push the shell back up to ride quiet. Fits 22.2 to 35 mm bars.
Description
Découvrez la sonnette de vélo Cricket, conçue pour améliorer votre sécurité aussi bien dans les rues animées de la ville que sur les sentiers tranquilles.
Cette sonnette offre deux modes sonores :
Un coup unique pour des avertissements nets et instantanés, et un mode cloche de vache continu pour une présence sonore permanente, afin que l’on vous entende dans toutes les situations.
Lorsque le silence est de mise, il suffit de tirer la coque de la cloche vers le bas pour couper le son du grelot, et s’adapter ainsi instantanément à votre environnement.
Two sounds, one bell
Press the striker for a single, crisp strike to warn a walker or a car. Pull the dome down and it becomes a continuous cowbell for a busy trail.
It rings for you on the trail
In cowbell mode the trail shakes the bell for you, so you keep both hands on the bar. Push the shell back up to ride quiet on smooth ground.
Feature
Fits 35 mm bars out of the box
The clamp fits a 35 mm bar with no spacer. Two spacer rings in the box adapt it to 31.8 mm and 22.2 mm bars.
Everything in the box
One bell and two spacer rings, for 31.8 mm and 22.2 mm bars. Nothing else to buy, and a single 3 mm bolt does the rest.
Mount it your way
Clamp it left or right of the stem, at any angle. Granite suggests about 45 degrees for the best cowbell sensitivity. At home on a mountain, gravel, road or BMX bike.
Specs
- TypeHandlebar bike bell, dual tone
- ModesSingle-strike and cowbell (motion-rung)
- MutePush the shell up to silence the cowbell
- Handlebar fit22.2, 31.8 and 35 mm (spacers included)
- MountingSingle 3 mm bolt clamp, left or right
- Size34.5 mm wide; 67.5 mm tall (single-strike), 73.5 mm (cowbell)
- Weight60 g
- MaterialBrass dome, zinc alloy striker
- ColourBlack with orange striker
- In the boxBell, 31.8 mm spacer, 22.2 mm spacer
- ModelGBL01
Set it up in a minute
Match the spacer to your bar
A 35 mm bar needs no spacer. Use the 31.8 mm or 22.2 mm spacer ring for a narrower bar.
Clamp it on with a 3 mm hex key
Seat the bell on the bar, left or right of the stem, and tighten the single bolt. Check it clears your frame before you ride.
Push up to strike, pull down for cowbell
Push the shell up for single-strike mode, or pull it down for the cowbell. No tools; switch it by hand any time.