Support Airtag pour kit d’outils Granite Stash
Support Airtag pour kit d’outils Granite Stash
Track your bike from inside the fork.
Convert your Stash or Stash RT lower cap into a hidden home for an Apple AirTag, tucked under the fork crown. CNC alloy cap, RF-transparent cover. AirTag not included.
Description
Le kit de fixation AirTag Granite Stash offre un moyen discret et sécurisé d’intégrer un AirTag dans votre trousse Stash ou Stash RT. Conçu pour se loger proprement à la base de votre fourche suspendue, il fonctionne parfaitement avec les capuchons inférieurs de 42 mm sur les pivots coniques, garantissant la compatibilité avec les systèmes Stash et Stash RT.
Fabriqué avec un capuchon inférieur en alliage usiné CNC et un capuchon composite pour éviter les interférences de signal RF, il garantit un suivi du vélo précis et fiable. Le kit comprend un élégant capuchon en plastique noir mat imprimé en 3D et un capuchon inférieur en alliage.
Remarque : AirTag non inclus.
Hidden under the fork crown
The mount rides low in the steerer, under the crown. It looks like a stock fork cap.
Replaces your kit's lower cap
Swap it in for the 42 mm lower cap on your Stash or Stash RT. The tool still stashes above it.
Feature
Fits the Stash RT
Drops in for the Stash RT lower cap. Run the ratchet kit and this is your mount. Stash RT tool kit.
Fits the original Stash
Also fits the original 42 mm tapered-steerer Stash kit. New to Stash? Start with the Stash RT.
42 mm tapered steerers
For 42 mm lower caps on tapered steerers. Not compatible with the Stash RCX or 30 mm straight steerers.
Specs
- TypeHidden AirTag mount for the Stash tool kit
- FitsStash and Stash RT, 42 mm lower cap
- SteererTapered
- Not compatibleStash RCX, 30 mm straight steerers
- Lower capCNC-machined alloy
- CoverComposite, RF-transparent
- AirTagNot included; one Apple AirTag, silver side out
- ColourBlack
- Tools to fit5 mm and 6 mm hex
- In the box1 conversion lower cap, 1 cover
Instruction
Swap the lower cap
Take the tool kit out of the steerer, remove the standard 42 mm lower cap, and move its O-ring and center nut onto the conversion cap.
Drop the AirTag in
Place the AirTag in the cap with the silver side facing out, then thread the composite cover on over it.
Cover it and refit
Fit the mount back under the crown, set the headset preload and stem bolts, and slide the tool back in above it.