Granite Stash RT Kit d’outils à cliquet

Prix régulier $69.99
Prix soldé $69.99 Prix régulier
Prix unitaire
Granite Stash RT Ratchet Tool Kit, sleek black in-frame bike tool with hidden bits and pop-up base for compact bicycle repairs

Granite Stash RT Kit d’outils à cliquet

A mountain bike steerer tube, featuring a Granite Stash RT multi-tool mounted at the top. The background shows a scenic mountain view with trees, indicating an outdoor setting.

The tool kit that lives in your fork.

A two-way mini ratchet and 9 bits, stored inside your steerer tube. Nothing to pack, nothing to forget. Fits 1-1/8" to 1.5" tapered forks. 159 g.

Three bike tools on a rocky surface: an orange Stash RT multi-tool, a silver ratchet, and a black multi-bit tool kit.

Description

Stash RT propose une solution révolutionnaire pour les passionnés de vélo : un jeu de clés hexagonales astucieusement rangé dans le pivot de fourche de votre vélo. Ce kit compact mais complet comprend une mini‑clé à cliquet, 8 embouts d’outil miniatures et un embout PH1 rallongé servant de levier. Profitez de la liberté d’avoir vos clés hexagonales rangées en toute sécurité et toujours à portée de main avec Stash RT.

Le Stash RT dispose d’un corps d’outil fin qui s’adapte à toutes les fourches, y compris celles avec pivot conique interne, à l’exception de la Fox 38 Performance. Il est conçu pour accueillir des pivots coniques dont la longueur « du bas du té de fourche au haut de la potence » est comprise entre 150 mm et 250 mm.

Embouts d’outil : 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / T25 / PH1

Poids : 159 g

A real ratchet, not a folding key

A real ratchet, not a folding key

Reversible head, rated to 20 Nm. Spin bolts quickly on a dropper collar or a stem where a multi-tool can't turn.

Disappears into your fork

Disappears into your fork

The whole kit rides inside the steerer tube. Push and turn the top cap and it lifts out, bits loaded.

Granite Stash RT contents laid out on white: two-way mini ratchet, eight 1/4-inch hex and T25 bits with orange bands, and a long PH1 bit

  Feature

  • Rangement compact pour outils : permet de ranger une mini clé à cliquet et 9 embouts essentiels à l’intérieur du pivot de fourche de votre vélo pour un accès rapide.
  • Support d’outils à ressort : le support intérieur des outils est à ressort pour une récupération facile des outils.
  • Embouts polyvalents : comprend des embouts hexagonaux de 2 mm à 8 mm, un T25 et un embout PH1 rallongé pour plus de levier.
  • Entretien simplifié : gardez vos outils en sécurité et toujours à portée de main pour les réparations et réglages en cours de route.
Tapered steerers, 1-1/8

Tapered steerers, 1-1/8" to 1.5"

Fits inner-tapered forks like the RockShox Pike and Lyrik or Fox 36 and 38. The housing needs about 121 mm of clear steerer inside.

Measure your steerer stack

Measure your steerer stack

170 to 250 mm from the top of the stem to the bottom of the fork crown. Three bolt lengths (50, 80 and 110 mm) are in the box to match.

Doesn't fit your fork?

Doesn't fit your fork?

Not for Fox 38 Performance or eMTB forks. For a road or closed straight steerer, the Stash RCX uses an expander and fits 23.5-27 mm round steerers instead.

Specs

  • TypeIn-steerer ratchet tool kit
  • RatchetTwo-way, 1/4" bits, 92 mm, 20 Nm max
  • Bits9: 2, 2.5, 3, 4, 5, 6, 8 mm hex, T25, extended PH1
  • MaterialAL6061 housing, CR-V steel ratchet, S2 steel bits
  • Weight159 g installed
  • Steerer type1-1/8" to 1.5" tapered, incl. inner-tapered
  • Steerer stack170-250 mm, top of stem to fork crown
  • Bolts includedM6 x 50, 80 and 110 mm
  • Not compatibleFox 38 Performance, eMTB, road/closed straight steerers
  • ColoursBlack, Orange

Install

1. Remove the star nut

1. Remove the star nut

Take off the top cap and stem to reach the star nut inside the steerer. Remove it and clean the tube. No tapping.

2. Fit the housing, set preload

2. Fit the housing, set preload

Refit the stem with the steerer sitting about 3 mm low. Drop in the tool housing, run the matching M6 bolt down to the lower assembly and tighten to 2-3 Nm, then align and tighten the stem bolts.

3. Load the bits and ride

3. Load the bits and ride

Load the bits with the big end to the magnet and the M6 bit at the bottom, drop the ratchet in and close the top cap. Push and turn to pop it out on the trail.

Product Review