Adventurous Way Of Life Reviews our Juicy Nipple Valve Caps - Granite Design
News

Adventurous Way Of Life Reviews our Juicy Nipple Valve Caps

Adventurous Way Of Life reviewed the Juicy Nipple valve caps and led with the part we did not expect anyone outside cycling to notice:

Originally created for bicycles, Granite Design's Juicy Nipple Schrader Valves replace the cheap plastic covers on your vehicle's tires, too, and pack a bonus feature that pulls double duty.

The bonus feature is the point of the whole product. It is a valve cap that is also a valve core remover — so the tool you need for the job is already screwed onto the valve.

Why a valve cap with a core remover is worth the swap

The plastic cap that came with your tyre does one thing: keep grit out. It gets lost, it cracks, and it is not a tool.

Meanwhile the valve core is something you genuinely need to remove — and almost nobody carries the tool for it:

  • Topping up tubeless sealant. The core has to come out to get sealant into the tyre.
  • Clearing a clogged core. Dried sealant blocks the valve and the tyre will not take air.
  • Dumping pressure fast, on a Schrader valve, without holding a pin down with a fingernail.
  • Fitting a plug properly after a tubeless repair.
Granite Juicy Nipple valve caps: two large oil-slick finish Schrader caps beside a row of anodised alloy caps in red, green, blue, pink, gold, purple and black
Nine colours, including the oil-slick anodising.

Presta or Schrader — they work differently

Presta cap Schrader cap
How you use it Flip the cap sideways to unscrew the core Flip the cap upside down and push to release air, or unscrew the core
Weight 2.5 g per pair 4.2 g per pair
Fits Presta valves — road, gravel, MTB Any Schrader valve — bikes, motorcycles, cars
Sets 9 colours 9 colours, 2-piece or 4-piece

Both are CNC-machined alloy with a knurled grip, which is what makes them usable as a tool at all — a smooth cap gives you nothing to turn against a core that has been sitting in sealant for a season.

If you run tubeless, look at the stem set instead

The Juicy Nipple valve stems put the same trick on the valve itself: 45 mm tubeless Presta stems in CNC-machined 6061 alloy, with the core-remover caps included. 10 g per pair, and 17 colour combinations including colour-on-black.

If you are already replacing tired stems, this is the version to buy — you end up with the tool permanently attached to the wheel rather than in a pocket.

Read the full review

Adventurous Way Of Life covered the Schrader version on car tyres, which was not the use case we designed for — but it is the one that makes the argument cleanly. A cap that is only a cap is a part you lose. A cap that is a tool is a tool you cannot leave behind.

Previous
Off-road.cc shows you how to maximize the Granite Design tools.
Next
RocknRoll TQ Reviewed: See What Wideopenmag Has to Say